SWEPCO 350 Engine Assembly and Break-In Oil

Clear
  • Description
  • Additional information
  • KEY BENEFITS
  • Properties

Description

SWEPCO 350 Engine Assembly and Break-In Oil is designed to provide superior protection and performance during those first critical miles of a new or rebuilt engine. Those first few miles are where the rings, bearings, and seals settle into place. SWEPCO 350 Engine Assembly and Break-In Oil contains higher zinc and phosphorous content to protect rubbing surfaces such as rings and cylinder walls, valve trains and crank case components.

Engine builders have had increased concerns about modern engine oil’s ability to protect new and rebuilt engine parts during initial startup. Especially the flattappet cams, lifters and cylinder walls. Current engine oils have reduced anti-wear additives and added friction modifiers in an attempt to increase gas mileage in new vehicles.

SWEPCO 350 Engine Assembly and Break-In Oil works to protect new parts during the initial run-in period so that the rings seat quickly to provide maximum compression. New camshafts and lifters usually are not seasoned, or heat cycled so they are susceptible to excessive wear during the break-in period. SWEPCO 350 contains extra zinc and phosphorous to provide superior anti-wear properties. SWEPCO 350 promotes extra film strength to increase torque and horsepower while reducing metal to metal contact.

Additional information

Brand

SWEPCO

SAE

SAE 10

Shipping

Case of 24 US Quarts (0,947 liter), Pail (16 kg./19 liter)

  • Fast and efficient ring seal
  • Higher levels of zinc and phophorous for maximum protection
  • Compatible with Methanol and high-octane racing fuel
  • Recommended for use with flat-tappet camshafts
  • Does not require additional additives
  • Up to 40 horse power increase
SAE GRADE .................................................................................. 10
Viscosity at 40oC cST .................................................................... 36.82
Viscosity at 100oC cSt …................................................................ 6.25
Viscosity Index ……………………...................................................... 119
LBS / Gallon .................................................................................. 7.10
Specific Gravity ............................................................................. 0.8573 g/ml
Pour Point °F ……………………….................................................... -40
Pour Point °C ……………………….................................................... -40
Flash Point °F ……………………...................................................... 405
Flash Point °C ...…………………...................................................... 207